Bendix King 18049-0002 Synchro Transmitter – A Comprehensive Guide to Understanding, Installing, and Troubleshooting

Are you looking to install or troubleshoot the Bendix King 18049-0002 Synchro Transmitter? This comprehensive guide will walk you through everything you need to know about understanding, installing, and troubleshooting this essential aviation component. 

 

Written in simple and easy-to-understand language, this guide is designed to help both beginner and experienced users alike!

What is a Synchro Transmitter?

A synchro transmitter is a device used in aviation to transmit angular position data from one component to another. It is an essential part of many aircraft systems, including navigation, control, and instrumentation systems. 

 

These transmitters convert mechanical rotational movement into electrical signals, which can then be transmitted to other components or displays.

The Bendix King 18049-0002

Bendix King is a well-known company that makes high-quality electronics for airplanes. This sending device is essential for airplanes. It sends exact information about the airplane’s direction and angle to other instruments and systems inside the airplane. 

 

Many different kinds of airplanes use this device. It is known for being reliable, accurate, and strong enough to work well in the difficult conditions of flying airplanes. The 18049-0002 sending device is crucial for keeping airplanes safe and running smoothly. 

 

It provides vital data to flight instruments, autopilot systems, and other electronics. It is built tough to handle the turbulence, temperature changes, and other difficult situations that can take place during the takeoff.

 

 Bendix King is committed to making quality products that meet strict aviation rules, so the 18049-0002 is a trusted choice for airplane manufacturers and operators everywhere.

Principles of Operation

Synchro transmitters operate on the principle of electromagnetic induction. They consist of a rotor and a stator, both of which have windings. As the rotor rotates, it generates an alternating current (AC) in the stator windings, which varies in amplitude and phase depending on the rotor’s angular position. 

 

This electrical signal can then be transmitted to other synchro components, such as receivers or control transformers, allowing for the accurate transfer of positional information. 

 

FM transmitter apps can be used to wirelessly transmit audio from your device to your car’s stereo system, providing a convenient way to listen to music, podcasts, or other audio content without the need for physical connections.

Installation and Wiring

Before installing the Bendix King 18049-0002, it’s essential to gather all the necessary tools and materials. This includes wire strippers, crimping tools, and any required connectors or adapters. 

 

Additionally, you’ll need access to the aircraft’s wiring diagrams and installation manuals to ensure proper integration with existing systems.

Step-by-Step Installation Guide

1. Locate the appropriate mounting location for the transmitter, ensuring it’s easily accessible for maintenance and inspection.
2. Securely mount the transmitter using the provided mounting hardware, following the manufacturer’s instructions and any applicable aircraft maintenance manual guidelines.
3. Connect the power supply wires according to the manufacturer’s specifications and the aircraft’s electrical system requirements.
4. Wire the input and output signals following the aircraft’s wiring diagram and the transmitter’s installation manual, ensuring proper connections and compatibility with other synchro components.
5. Double-check all connections for proper seating and secure any loose wires using appropriate cable ties or lacing.

Testing and Troubleshooting

After the installation is complete, it’s crucial to test the synchro transmitter to ensure it’s functioning correctly and providing accurate data. 

 

This typically involves performing a series of operational checks and verifying the accuracy of the transmitted data by comparing it with known reference values or other instruments.

Common Issues and Solutions

Even with proper installation, issues can sometimes arise with the Bendix King 18049-0002. Here are some common problems and their potential solutions:

 

No Power

1. Check the power supply connection and fuses for any issues or malfunctions.
2. Verify that the correct voltage is being supplied to the transmitter, as specified in the installation manual.

 

Inaccurate Data Transmission

1. Inspect the input and output wiring for any loose connections, damage, or interference from nearby electrical sources.
2. Ensure that the transmitter is properly set and aligned according to the manufacturer’s procedures.
3. Check for any mechanical obstructions or binding that may be affecting the rotor’s movement.

 

Intermittent Operation

1. Check for any loose or rusted connections, which can cause intermittent signal loss or interference.
2. Inspect the transmitter for any physical damage or wear, such as worn bearings or damaged windings, which may affect its operation.
3. Look for any sources of electrical noise or interference that could be disrupting the transmitter’s signals.

Seeking Professional Assistance

If you encounter issues that you cannot resolve through basic troubleshooting steps, it’s recommended to seek assistance from a qualified aviation professional or the manufacturer’s technical support team. 

 

They can provide expert guidance, and specialized tools, and ensure the safe and proper operation of the Bendix King 18049-0002 Synchro Transmitter by following applicable regulations and standards.

Maintenance and Care

To ensure the longevity and reliable performance of the Bendix King 18049-0002, it’s essential to conduct regular inspections as part of your aircraft’s maintenance schedule. 

 

This includes checking for any loose connections, physical damage, or signs of wear on the transmitter itself, as well as verifying its accuracy against other instruments or known reference values.

Proper Storage and Handling

When not in use or during transportation, it’s important to store the synchro transmitter in a dry, clean environment, free from excessive moisture, dust, or temperature fluctuations. 

 

Proper handling during installation and maintenance is also crucial to prevent any accidental damage or misalignment of the internal components.

Adhering to Regulations and Standards

As with any aviation equipment, it’s essential to follow all applicable regulations and standards when installing, operating, and maintaining the Bendix King 18049-0002 Synchro Transmitter. 

 

This may include compliance with FAA regulations, aircraft manufacturer guidelines, and industry best practices to ensure the safety and airworthiness of the aircraft.

 

By following this article, you’ll be well-equipped to understand, install, and troubleshoot the Bendix King 18049-0002 Synchro Transmitter with confidence. Remember, safety should always be the top priority when working with aviation equipment, and seeking professional assistance when needed is highly recommended.

 

FAQ’s 

What is a synchro transmitter?

A synchro transmitter is a device that transfers angular position data in aviation systems by converting mechanical movement into electrical signals.

 

How do I install the Bendix King 18049-0002?

To install the Bendix King 18049-0002, mount it securely, connect power and signal wires following diagrams, and check all connections.

 

What should I do if the Bendix King 18049-0002 has issues?

If the Bendix King 18049-0002 has issues like no power or inaccurate data transmission, check connections, calibration, and seek professional help if needed.